(800) 473-4237 / 508-992-6464 sales@focenter.com

ÅngströmLap Lapping Film

focenter angstromlap lapping films.pngOne of the most important decisions a cable assembly production, or process manager will make, is which lapping film to use. Without a consistent lapping film, production costs can not be controlled. Instead of quickly and efficiently fulfilling work orders, costly reworks will eat up both time and resources.

Lapping film that only lasts a few cycles before it needs to be thrown away can also lead to a much higher per termination cost than a film that lasts up to 10, 20 or 30 cycles. Our SEQUOIA Diamond films are designed to last well over 10 cycles.  Achieving consistent results that meet the demanding technical specifications for single mode systems requires the optimization of many factors throughout the termination and testing process.

FOC Lapping Film Technical Resources

 

HEADER Film Technical Content

 

ÅngströmLap ® 
The Most Widely Used Lapping Film
in the World

 

Fiber Optic Center, the global supplier of ÅngströmLap, is an industry leader in developing high performance, cost effective polishing processes for some of the largest assembly houses in the world. We have or can produce an ÅngströmLap single mode or multimode process which is tailor-made for any machine, connector style and ferrule material on the market today, including multi-fiber MTs and MT-RJs. If you are having trouble with your process, our in-house process engineers can offer assistance at any time over the phone or can make on-site visits when necessary.

One of the most important decisions a cable assembly production, or process manager will make, is which lapping film to use. Without a consistent lapping film, production costs can not be controlled. Instead of quickly and efficiently fulfilling work orders, costly reworks will eat up both time and resources. Lapping film that only lasts a few cycles before it needs to be thrown away can also lead to a much higher per termination cost than a film that lasts up to 10, 20 or 30 cycles. Our SEQUOIA Diamond films are designed to last well over 10 cycles.

Achieving consistent results that meet the demanding technical specifications for single mode systems requires the optimization of many factors throughout the termination and testing process.

These include:

Screenshot 2015-05-17 22.16.36

FOC can supply detailed polishing instructions for most commercially available fiber optic polishing machines.

Please contact us for details.

ÅngströmLap ®

SEQUOIA™ Long Life Diamond Film

Diamond lapping films cut and polish the hard ceramic ferrules and the softer fibers close to the same rate, easily controlling fiber undercut or protrusion. Diamond also helps assure the ferrule geometries meet the Telcordia GR 326 version 3 specifications, and leave the ferrule in a condition ready for the final polish film. Diamond is always recommended for the intermediate steps of machine polishing of single mode or multimode ceramic connectors, and for single mode hand polishing of ceramic connectors. When stopping at a diamond of 1um or less, a good surface finish results with great geometries, but with a return loss of -35 dB at best. If back reflection of -55 dB or better is required, see our Final Polish Films.

SEQUOIA is the longlife diamond film which offers twice the working life of standard diamond films, therefore cutting your overall diamond lapping film consumables cost in half. During the manufacturing process, proprietary quality control steps are implemented, ranging from raw materials selection to final QC and testing. SEQUOIA is clearly at a level above all other diamond films available today.

Final Polish Film

When a return loss of -55dB or better is needed with a controlled amount of undercut or protrusion, a special final polish film is required. This film maintains the geometry of the ferrule and improves the return loss and surface quality.

The following final polish films use silicon dioxide material and will polish the ceramic ferrule and glass fiber near the same rate. These films require only distilled water, and do not need messy slurries to meet back-reflection of -55dB or better for UPC, and fiber heights compliant with IEC Telcordia specifications.

ÅngströmLap SEQUOIA FPF is the latest final polish film to come from the ÅngströmLap line of films. It was developed to reduce single mode assembly production consumables cost while maintaining the most stringent manufacturing processes in the industry; therefore, lot-to-lot product consistency is assured, enabling you to achieve uniform precision polishes, keeping yields at their maximum. SEQUOIA FPF outperforms the rest, at a price that’s lower than you would expect.

ÅngströmLap ®

Aluminum Oxide Film
When diamond film is not needed, like in many multimode applications, aluminum oxide is recommended. Some
aluminum oxides can even be used as the final polish. The 0.5um and 0.3um will produce return losses of -50 dB or
better, but because they cut the glass at a much quicker rate than the ceramic, undercut may occur. See Final Polish
Films for the best final polish film options and see Silicon Carbide Films for more aggressive epoxy and glass removal.

ÅngströmLap ®
Silicon Carbide Film
As a more aggressive material, Silicon Carbide is often recommended over Aluminum Oxide for epoxy and glass
removal, and is not commonly used for the later steps in the polishing process.

Search Our Catalog

Search Our Content

Follow me on Twitter

Follow me on Twitter

FOC-dbrodie

Donna 

Donna Brodie

 

Mobile: 209-570-2552

Twitter: @FilmExpertsFOC

DBrodie@focenter.com

Donna has 25 years in the abrasive coating industry and is your FOC technical film manager. Follow Donna @FilmExpertsFOC

Engage with Us

Subscribe to our mailing list

* indicates required