EPOXY VIDEOS

Fisnar DC200 Epoxy Dispensing MachineView a demonstration of the DC200 and request a quote today.   TRANSCRIPT: Epoxy is a “Critical Component” of any fiber optic cable assembly. Controlling the amount of epoxy dispensed into a connector is essential to producing...

View a training demonstration of How to Mix Epoxy Bi-Packs.   Transcript: The two epoxy components Part A and Part B are either separated with the clip or burst seal. If separated by a clip, remove the clip so that Part A and Part B are no longer separated. If...

Part of the Fiber Optic Center training series - this video shows a simple overview of how to dispense epoxy into fiber optic connectors: manual and pneumatic.  Manual Injection of Connector remove the string cap stopper, place tip on the syringe insert plunger and...

Featuring a larger internal air solenoid and digital programming the DC200 is recommended for operations that require immediate and fast reaction for de-pressurization. The digital programming allows you to set the level of suck-back and measure any level of...

See step-by-step instructions on how to load a syringe with epoxy. Place the Cap at the end of the syringe to contain the epoxy Using a syringe holder helps keep the syringe stable as the epoxy is loaded into the syringe Push the epoxy to one side of the bi-pack and...

Drucker Diagnostics Benchtop Model 614B Centrifuge*Update* - The Drucker 614B Centrifuge has been replaced with the LW Scientific USA E8 Centrifuge. Request a quote.  The Model 614B centrifuge provides runtime flexibility and fixed angle processing at an affordable...

Domaille Engineering CO-6500 Universal Cure OvensView the product demo and request a quote for one of the Domaille CO-6500 Cure Ovens below. Cure Oven with MT 24-position Horizontal Carrier Tray Cure Oven with 48-position Vertical Carrier Tray for use with Molex Oven...