Are there specific reasons our industry has not been automating the production of connectors?
There are two key reasons our industry has not been automating the production of connectors:
- We’ve been able to reduce the cost of making the basic connector bodies. Much of this relates to automated injection molding processes and ceramic ferrule standardization.
- We’ve been able to reduce the cost of labor by moving the large connectorization operations to low-labor-cost regions. That migration has actually stymied the market for medium and large-scale, flexible automation that can deal with the rapid pace of technology changes in connecterization.
It’s interesting to note that our industry has accepted and required sophisticated testing and inspection processes and has brought them to a very high level of Island automation. By that I mean that the equipment provides process automation testing within its own environment but is not neutrally interfaceable with other similar equipment. We have not brought the actual connector assembly operation to that level of automation. Cable Assembly houses continue to struggle with a bottleneck in process at that testing stage and eagerly anticipate improvements.
READ THE FULL BLOG ARTICLE HERE: A call to action: Automation in the connector assembly process is an essential next step for fiber optic connectivity
ADDITIONAL CONTENT & RESOURCES:
Answered by AskFOC Technical Team August 29, 2019
Have a technical question for Fiber Optic Center?
Please email your question to AskFOC@focenter.com and we will respond ASAP.
In addition to replying, we will post your question and our answer here on focenter.com. Everyone remains anonymous when we post so feel comfortable asking. You can also search your question and others in our content search.
- Considerations regarding freezing epoxy – THAWING - November 13, 2019
- Crystallization in Epoxies: How to Identify and Reverse it - October 23, 2019
- Measuring Insertion Loss and Return Loss Recommendations to Achieve the Best and Most Accurate Test Measurement - October 23, 2019
- Cross-Sectioning Fiber Optic Connectors: An Effective Diagnostic Method to Identify Defects and Resolve Process Issues - October 23, 2019
- The “Ideal” Fiber Height for a Fiber Optic Connector – and How to Achieve It - October 23, 2019
- Considerations regarding freezing epoxy – recommended length of time - October 23, 2019
- Techniques when using stripping tools - October 18, 2019
- Considerations regarding freezing epoxy – implementing process controls - September 18, 2019
- Aramid yarns and Good stripping techniques - September 11, 2019
- When the “back-side” connector end-face is contaminated, it is difficult to have access to remove the connector for cleaning - September 8, 2019