What happens if you undermix epoxy?
In fiber optic cable assembly applications, most epoxy package sizes are quite small – just a few grams – so undermixing is typically not an issue. While mixing the resin and hardener (Part A and Part B), ensure all the material from the corners and edges of the bi-pack is thoroughly blended to achieve a uniform color. In the rare instances when epoxy is undermixed, Part A and Part B do not fully cross link to provide the necessary adhesion.
READ THE FULL BLOG ARTICLE HERE: Epoxy Bi-Pack News – and Usage Tips for Best Results
ADDITIONAL CONTENT & RESOURCES:
- Category Resource: FOC Epoxy Page
- Find More Information in this Blog: Helpful Epoxy Tips (and a Few Tricks)
Answered by AskFOC Technical Team September 11, 2018
Have a technical question for Fiber Optic Center?
Please email your question to AskFOC@focenter.com and we will respond ASAP.
In addition to replying, we will post your question and our answer here on focenter.com. Everyone remains anonymous when we post so feel comfortable asking. You can also search your question and others in our content search.
- Considerations regarding freezing epoxy – implementing process controls - September 18, 2019
- Aramid yarns and Good stripping techniques - September 11, 2019
- When the “back-side” connector end-face is contaminated, it is difficult to have access to remove the connector for cleaning - September 8, 2019
- Fiber Optic Cable Splicing Explained - September 7, 2019
- Ways in which the end-face can become contaminated along the way - September 6, 2019
- Removal of coatings from short fiber in certain sections - September 5, 2019
- End-face quality and cleanliness - September 4, 2019
- Re-cleaning a connector after installation - September 4, 2019
- The two wavelengths used for Insertion Loss testing - September 3, 2019
- Ensuring connector end-faces meet industry standards on end-face cleanliness (ex. IEC 61300-3-35) - September 2, 2019