Why are advancements in connectivity important and new designs so inevitable?
For years, connectivity in the cable industry was considered a “throw it over the wall” issue with a focus on leaving the problem to others who then became responsible for the convenience of connecting the cables designed to the outside world. It wasn’t considered necessary to pursue technological coordination between the cable designers and connectivity designers. When we talk about advancements in connectivity we have to look to the past, because with analog communications the cable lost bandwidth quickly with length so connectivity was either primary as with RF coax or totally secondary with twisted pair in that techniques for termination were very basic. In today’s world, we are tasking our existing infrastructure to perform well beyond its initial design criteria and designing new infrastructure to accommodate the spiraling demands of bandwidth today’s consumer demands. Simply put, connectivity is becoming the gating factor in pushing more bandwidth from today’s existing systems and the new designs entering the marketplace as we speak. Effectively it is critical to the overall system approach that is now required.
READ THE FULL BLOG ARTICLE HERE: Looking at our industry from a systems perspective: The future of cable is inextricably tied to connectivity.
ADDITIONAL CONTENT & RESOURCES:
Category Resource: FOC Fiber & Cable Page
Answered by AskFOC Technical Team February 18, 2019
Have a technical question for Fiber Optic Center?
Please email your question to AskFOC@focenter.com and we will respond ASAP.
In addition to replying, we will post your question and our answer here on focenter.com. Everyone remains anonymous when we post so feel comfortable asking. You can also search your question and others in our content search.
- Lapping film options, part 2 - May 18, 2020
- Standards for optical cable assembly manufacturers - May 7, 2020
- Key specifications of connectors - January 3, 2020
- Considerations regarding freezing epoxy – implementing process adjustment - December 16, 2019
- Considerations regarding freezing epoxy – THAWING - November 13, 2019
- Crystallization in Epoxies: How to Identify and Reverse it - October 23, 2019
- Measuring Insertion Loss and Return Loss Recommendations to Achieve the Best and Most Accurate Test Measurement - October 23, 2019
- Cross-Sectioning Fiber Optic Connectors: An Effective Diagnostic Method to Identify Defects and Resolve Process Issues - October 23, 2019
- The “Ideal” Fiber Height for a Fiber Optic Connector – and How to Achieve It - October 23, 2019
- Considerations regarding freezing epoxy – recommended length of time - October 23, 2019