Why do we need to consider the Tg when selecting an epoxy?
One reason to consider the Tg is in selecting an epoxy that is appropriate for an application. For an application requiring a flexible epoxy, a low Tg, something below 0°C is appropriate. In most cases this would actually not be an epoxy; more likely a silicone material. But either way, a silicone or flexible epoxy has the ability to move and absorb stress – as in an application where the epoxy acts as a sealant, or provides shock and vibration protection. Other applications may require the strongest physical properties of the epoxy; in which case a high Tg (relative to the operating range of the application) would be appropriate. This would utilize the high strength, compression, tension, etc. properties of the epoxy.
Another reason to consider the Tg is that the thermal coefficient of expansion (TCE or CTE) is smaller at temperatures below the Tg, and larger for temperatures above the Tg – sometimes quite.
Depending on the application this could impact the performance of a device. If this is the case, then it is important to select an epoxy with a Tg that is entirely above or below the normal operating temperature range of the device.
The bottom line on Tg? The Tg provides important information about the nature of any given epoxy at its service temperature.
READ THE FULL BLOG ARTICLE HERE: The Glass Transition in Epoxies
ADDITIONAL CONTENT & RESOURCES:
- Category Resource: FOC Epoxy Page
- Find More Information in this Blog: Helpful Epoxy Tips (and a Few Tricks)
Answered by AskFOC Technical Team June 10, 2019
Have a technical question for Fiber Optic Center?
Please email your question to AskFOC@focenter.com and we will respond ASAP.
In addition to replying, we will post your question and our answer here on focenter.com. Everyone remains anonymous when we post so feel comfortable asking. You can also search your question and others in our content search.
- Considerations regarding freezing epoxy – THAWING - November 13, 2019
- Crystallization in Epoxies: How to Identify and Reverse it - October 23, 2019
- Measuring Insertion Loss and Return Loss Recommendations to Achieve the Best and Most Accurate Test Measurement - October 23, 2019
- Cross-Sectioning Fiber Optic Connectors: An Effective Diagnostic Method to Identify Defects and Resolve Process Issues - October 23, 2019
- The “Ideal” Fiber Height for a Fiber Optic Connector – and How to Achieve It - October 23, 2019
- Considerations regarding freezing epoxy – recommended length of time - October 23, 2019
- Techniques when using stripping tools - October 18, 2019
- Considerations regarding freezing epoxy – implementing process controls - September 18, 2019
- Aramid yarns and Good stripping techniques - September 11, 2019
- When the “back-side” connector end-face is contaminated, it is difficult to have access to remove the connector for cleaning - September 8, 2019