Cleaning is critical – The act of polishing removes material, similar to sanding wood.
To prevent contamination, it’s vital to thoroughly clean the fixture and ferrules between every polishing step.
Contamination causes scratching and will negatively impact visual yields.
Additional resources from the FOC team include:
- Glossary, Acronyms, Military Specifications for Connectors: http://bit.ly/2a2EFn8
- Q&A Resource: email technical questions to AskFOC@focenter.com
- Contact FOC with questions at: (800) 473-4237 / 508-992-6464 or email: firstname.lastname@example.org
- FOC Tips: considerations regarding freezing epoxy – extending the epoxy’s pot life and saving money - June 18, 2019
- Fiber Optic Center AskFOC: do you have epoxy information in the form of a matrix? - June 17, 2019
- FOC Tips: to investigate core cracking issues and identify the cause - June 13, 2019
- Fiber Optic Center AskFOC: how much water should we use when polishing? - June 12, 2019
- Fiber Optic Center AskFOC: Can you give more detail about the bend test? - June 11, 2019
- FOC Tips: the “golden rule” in stripping - June 11, 2019
- Fiber Optic Center AskFOC: why do we need to consider the Tg when selecting an epoxy? - June 10, 2019
- The Best Laid Plans of Mountains and Men: Crocker Mountain - June 10, 2019
- FOC Tips: Troubleshooting tips specific to Angle and Apex Offset - June 7, 2019
- Fiber Optic Center AskFOC: what are the most common issues regarding APC polishing geometry? - June 6, 2019