Another application that noticed a great advantage using the laser cleaver is fiber bundles.
As multiple large fibers and significant amount of epoxy forces the manual cleave being far from the ferrule tip, the laser cleaver will “cut” in multiple scans from multi directions the excess fiber in a single operation and provide a flat finish for automated polishing.
Additional resources from the FOC team include:
- Glossary, Acronyms, Military Specifications for Connectors: http://bit.ly/2a2EFn8
- Q&A Resource: email technical questions to AskFOC@focenter.com
- Contact FOC with questions at: (800) 473-4237 / 508-992-6464 or email: email@example.com
- FOC Tips: Passive component tester configurations - November 13, 2018
- Fiber Optic Center AskFOC: how much is enough or the right amount of epoxy in the connector? - November 12, 2018
- FOC Tips: Step two of single-fiber PC ferrules, developing a polishing process - November 9, 2018
- Fiber Optic Center AskFOC: what causes the Apex of a radius to be imperfect, to be off-center? - November 8, 2018
- FOC Tips: Insertion Loss (IL) is the loss of power due to adding a jumper. - November 7, 2018
- FOC Tips: MT ferrule geometry measurements - November 5, 2018
- FOC Tips: contamination on the fixture prevents ferrules from protruding equal distance from the base of the fixture - November 2, 2018
- Fiber Optic Center AskFOC: how do we decide which passive component tester to purchase? - November 1, 2018
- FOC Tips: Fiber Optic Connector Cross Sectioning example from “Connector A” notes - October 30, 2018
- Fiber Optic Center AskFOC: we are a fiber optic cable assembly manufacturer. For epoxy bi-packs, what are the typical package sizes? - October 29, 2018