Use the proper strip template when stripping for connectorization – All connector types are not designed exactly the same, and will have specific strip-length requirements for Aramid Yarn and Buffers. Most connector will have a “stripping template” available to describe the optimum strip lengths for each part of the cable. Be sure to ask your connector supplier for the proper strip charts prior to building.
Additional resources from the FOC team include:
- Glossary, Acronyms, Military Specifications for Connectors: http://bit.ly/2a2EFn8
- Q&A Resource: email technical questions to AskFOC@focenter.com
Have questions about this FOC Tip?
Contact FOC with questions at: (800) 473-4237 / 508-992-6464 or email: FiberOpticCenter@focenter.com and we will respond ASAP.
- Scratches and final film - August 13, 2019
- The importance of etching in Chemical Mechanical Planarization of MT ferrules - August 12, 2019
- Glass transition is analogous to the melting point of a solid - August 9, 2019
- Outer jacket and Good stripping techniques - August 7, 2019
- Is fabricating fiber optic cable assemblies a manual or automated process? - August 6, 2019
- Considerations regarding freezing epoxy – to stop the curing process - July 31, 2019
- If you use too much water and flood the platen - July 26, 2019
- Proper maintenance of polishing fixtures is absolutely essential - July 23, 2019
- Troubleshooting tips specific to Key Error - July 19, 2019
- Concerns with automation in the optical fiber industry - July 18, 2019