Imprint Materials / AL33

ÅngströmLink AL-33xx series polymers are optically clear with excellent stability and processing capabilities. These products feature a siloxane (silicon-oxygen) backbone with epoxy functional groups. This combination provides for extremely stable mechanical, electrical and optical properties at, or after exposure to high temperature.

The AL-33xx polymers are 100% solids. At room temperature, these polymers have long pot life. The uncured polymers are soluble in a variety of solvents for spin coating and produce a very uniform coating thickness across large areas (12 inch wafers).

Curing can be accomplished with both UV and heat. These materials can be photo-imaged and etched for pattern delineation processes. The cured polymers have excellent chemical and solvent resistance.

These products are supplied in light-sensitive protected bottles. These polymers offer a service temperature range of -40°C to + 350°C (+400°C for short periods of time).

Applications
Wafer level micro-optical components
Photoimageable waveguides
Microlenses
Dielectric films

Download Optical Epoxy Siloxane AL-3300 Series Datasheet Here (AL-3300 Series )

Download Epoxy Siloxane Datasheet Here (AL-33xx-200 Series )

Benefits

UV and/or Heat cureable
Good adhesion to silicon dioxide, copper and aluminum
Low optical absorption loss - 0.05 – 0.3 dB/cm
(depending on wavelength)
Thermally stabile, up to 350°C
(400°C for short periods of time)
Excellent chemical resistance
Refractive indices of 1.49, 1.51 and 1.55