Holiday Update:
Fiber Optic Center will be closed December 24 and 25.
Due to potential early carrier pickups, PLEASE HAVE ALL ORDERS IN BY NOON ON MONDAY, DECEMBER 23.
We will resume our regular business hours on Thursday, December 26.
ÅngströmBond® AB9110LV Clear Epoxy for PM and POF fiber, Room Temperature & Heat Cure (2.5g)
AB9110LV-2.5G
ÅngströmBond® AB9110, Room Temperature Cure, 2 Part Epoxy, 2.5 Gram Packet
FOC SHELF LIFE GUARANTEE: MINIMUM 5 MONTHS AT TIME OF SHIPPING
FOC SHELF LIFE GUARANTEE: MINIMUM 5 MONTHS AT TIME OF SHIPPING
The ÅngströmBond® 9110LV is a low viscosity, clear epoxy recommended for industrial adhesive, small potting and laminating applications where structural, mechanical and electrical properties are required. This two-part fiber optic epoxy exhibits good wetting and cures at room temperature. Available in a 2.5 gram packet.
Additional Features:
Additional Features:
- Low stress, bonds PM fibers and Plastic Optical fibers
- Bonds to optical fibers, glass ceramics, most metals and many rigid plastics
- Durable electrical insulator
- Resistance to water, weather, ozone and most chemicals.
- Color: Clear
- Mixed Viscosity @ 25°C: 500 cPs
- Coefficient of Thermal Expansion (CTE): 54 x 10-6 cm/cm
- Glass Transition Temperature, Tg: 83°C (degree celsius); 181.4°F (degree Fahrenheit)
- Shore D Hardness: 79
- Operating Temperature Range: -270°C to 125°C; -454°F to 257°F
- Refractive Index: 1.564
- Working Life: 1 Hour
- Minimum Cure Schedule:
- @25°C at 18 Hours
- @65°C at 1 Hour
- @90°C at 15 Minutes
Product Change Notification:
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging. Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9110LV-2.5G. At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1. Burst pouch / Burst seal instead of dividing clip seal – The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip. Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix. In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy’s pot life. With the burst seal bi-pack, this is
not a concern. Please note Burst Pouch Instructions: https://focenter.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@focenter.com
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging. Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9110LV-2.5G. At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1. Burst pouch / Burst seal instead of dividing clip seal – The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip. Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix. In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy’s pot life. With the burst seal bi-pack, this is
not a concern. Please note Burst Pouch Instructions: https://focenter.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
- Part Number
- Part A and Part B material
- Plastic outer packaging that contains the bi-pack material sleeve
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@focenter.com
The ÅngströmBond® AB9110LV Clear Epoxy for PM and POF fiber, Room Temperature & Heat Cure (2.5g) will be at the following trade show(s)*:
- OFC
- ECOC
- SPIE Photonics West
- ANGA COM
- IWCS Supplier Exhibition
- Fiber Connect