Holiday Update:
Fiber Optic Center will be closed December 24 and 25.
Due to potential early carrier pickups, PLEASE HAVE ALL ORDERS IN BY NOON ON MONDAY, DECEMBER 23.
We will resume our regular business hours on Thursday, December 26.
ÅngströmBond® AB9123 High Temperature Epoxy, Heat Cure (2.5g)
AB9123-2.5G
ÅngströmBond® AB9123, Heat Cure, 2-Part Epoxy, 2.5 Gram Packet.
FOC SHELF LIFE GUARANTEE: MINIMUM 6 MONTHS AT TIME OF SHIPPING
FOC SHELF LIFE GUARANTEE: MINIMUM 6 MONTHS AT TIME OF SHIPPING
The ÅngströmBond® 9123 Epoxy is a very fast-curing, high-temperature fiber optic connector epoxy. This low viscosity epoxy produces a very high-strength bond for glass, metal, ceramics, and most plastics. It utilizes the most popular chemistries for terminating connectors, making it an ideal choice for high-performance applications. Available in a 2.5 gram packet.
Additional Features:
Additional Features:
- High glass transition temperature allows it to pass the most stringent pistoning specifications.
- Excellent temperature cycling capabilities.
- Will withstand high humidity environments.
- Mixed Viscosity @ 25°C: 2,000 cPs
- Glass Transition Temperature, Tg: 120°C (degree celsius); 248°F (degree Fahrenheit)
- Shore D Hardness: 87
- Service Temperature Range: -60°C to 175°C; -76°F to 347°F
- Working Life: 3-4 Hours
- Minimum Cure Schedule:
- @100°C for 5 Minutes
- @120°C for 2 Minutes
- @150°C for 1 Minute
Product Change Notification:
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging. Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9123-2.5G. At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1. Burst pouch / Burst seal instead of dividing clip seal – The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip. Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix. In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy’s pot life. With the burst seal bi-pack, this is not a concern. Please note Burst Pouch Instructions: https://focenter.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@focenter.com
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging. Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9123-2.5G. At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1. Burst pouch / Burst seal instead of dividing clip seal – The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip. Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix. In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy’s pot life. With the burst seal bi-pack, this is not a concern. Please note Burst Pouch Instructions: https://focenter.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
- Part Number
- Part A and Part B material
- Plastic outer packaging that contains the bi-pack material sleeve
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@focenter.com
The ÅngströmBond® AB9123 High Temperature Epoxy, Heat Cure (2.5g) will be at the following trade show(s)*:
- OFC
- ECOC
- SPIE Photonics West
- ANGA COM
- IWCS Supplier Exhibition
- Fiber Connect