Holiday Update:
Fiber Optic Center will be closed December 24 and 25.
Due to potential early carrier pickups, PLEASE HAVE ALL ORDERS IN BY NOON ON MONDAY, DECEMBER 23.


We will resume our regular business hours on Thursday, December 26.

Fiber Optic Center will be at Photonics West - Schedule your meeting with a member of the FOC team now

    phone (800) IS-FIBER · (508) 992-6464

    Toggle Nav
    My Cart
    My Quote
    close
    Search

    When Should I Use Stick Cleaner and What Are Some Limitations to Using These Types of Cleaners?

    by:
    CLEANING: Ask FOC Ask FOC
    Published: March 28, 2017

    QUESTION: When should I use stick cleaner and what are some limitations to using these types of cleaners?

     

    ANSWER:

    Mechanical click cleaners are good for cleaning light to medium levels of end face contamination when you have many connector pairs that need to be cleaned. The basic mechanical action of the click cleaners is to have the cleaning tip rotate 180° which the cleaning strand flows across the tip. The effect is a sweep and lifting motion for wiping away contamination off the ferrule end face. Most mechanical cleaners have a spring loaded cleaning tip for controlling the contact force. If the ferrule end face has lot of residues or has a high to severe level of contamination, the mechanical click cleaners may not be able to wipe away enough of the contamination from the ferrule end face. Higher levels of end face contamination are usually encountered in outside plant networks and legacy networks that have not been properly maintained over many years.

            

    Most mechanical click cleaners have barrels and end caps that are designed to ensure the cleaner’s cleaning tip is wiping away end face contamination from the contact zone on the ferrule. The self-alignment feature eliminates the need for the good technique by the operator which means consistency with the mechanical click cleaner’s cleaning performance. Mechanical click cleaners usually offer a lower cost per clean when compared to other cleaning options like cassette based cleaners and stick cleaners.  The way to determine cost per clean is to take the price of the cleaner and divide it by the number of uses.

     

    There are some limitation with mechanical click cleaners. The cleaning region of mechanical click cleaners will never be able to completely clean a ferrule end face. The cleaning tip has to be able to fit inside and rotate unobstructed through the adapter sleeve.

    If your application is experiencing issues with particle migration, the better option may be to use a stick cleaner.

    The mechanical click cleaners will not be able to remove any dust contamination on the adapter sleeve.

     

     

     

    ADDITIONAL CONTENT & RESOURCES:

     

     

    Answered by AskFOC Technical Team WITH the Sticklers MicroCare Corporation Team March 28, 2017

     

    Have a technical question for Fiber Optic Center?

    Please email your question to AskFOC@focenter.com and we will respond ASAP.

    In addition to replying, we will post your question and our answer here on focenter.com. Everyone remains anonymous when we post so feel comfortable asking. You can also search your question and others in our content search.

     

     

    About the Author
    FOC FAQ Fiber Optic Center has a team of technical experts and marketing strategists with decades of years in the field. This team contributes to the fiber, cable and specialty industries coverage through news, alerts, reports and general media information.
    Education Resources

     

    Light Brigade Certified Training

     

    About Fiber Optic Center, Inc.
    Fiber Optic Center, Inc., (FOC), is an international leader in distributing fiber optic components, equipment and supplies and has been helping customers make the best cable assemblies in the world for over two decades. Several areas of specialization and expertise, in which they are the industry leader, make them the preferred choice for many of the world’s fiber professionals. In these key technology areas, FOC is "at least as technical as the manufacturer" about the products they sell. Striving to "make the business part easy," they offer outstanding and personal customer service, low or no minimum purchase order values, and from-stock delivery on industry-leading products and technology. FOC is the industry connection to the most innovative optical products, technologies and technical experts who integrate their manufacturing knowledge and vast experience into customers' worldwide operations. @FiberOpticCntr

    For further information contact:
    Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA 02740-6322
    Toll Free in US: 800-IS-FIBER or 800-473-4237 . Direct 508-992-6464. Email: sales@focenter.com or fiberopticcenter@focenter.com

    For media contact:
    Kathleen Skelton, Director of Strategic Marketing, C: 617-803-3014 . E: kskelton@focenter.com
    Copyright Notice: Copyrights in all articles published on focenter.com are owned by Fiber Optic Center, Inc. (FOC) or other individuals or entities. No content on focenter.com may be reproduced, stored in a retrieval system, or transmitted in any form of by any means, electronic, mechanical, photocopying, recording, or otherwise, in whole or in part, without the prior written permission of Fiber Optic Center, Inc.