CST-1140 Round Cable Strip & Ring Tool for Cables 3/16” to 1 1/8” in Diameter
View a demonstration of the Jonard CST-1140 and request a quote today.
Transcript:
The CST-1140 is a round cable slip and ring tool specifically designed to remove the jackets or insulation from round cables or wires. The tool features the following black knob on the top allows you to precisely set the blade depth. The gray knob here allows you to switch from ring, spiral or slitting operations. The tool is designed to cut through a variety of materials such as rubber, PVC, polyethylene and other similar materials. The cable holder here allows you to install cables from 3/16 of an inch to one in 1/8 of an inch in diameter. The tool is ergonomically designed, easy to install the cables and a large ringing hole here allows you to easily ring or pull cable for slitting.
This article is an original publication of Fiber Optic Center, Inc. It is shared publicly for educational and reference purposes to support learning and professional development within the fiber optics industry.
You are welcome to read, cite, or reference this material for non-commercial and educational purposes, as long as full credit is given to Fiber Optic Center, Inc. and the author.
Reuse, reproduction, or adaptation of this content — including rewriting, republishing, or incorporating it into new materials (such as websites, blogs, marketing text, technical guides, or AI-generated content) — is not permitted without prior written consent from Fiber Optic Center, Inc.
This material is protected by copyright law upon publication, even if not formally registered.
Use of this content for AI training, automated data extraction, or derivative content generation is prohibited.
Fiber Optic Center monitors and enforces the integrity of its intellectual property through digital identifiers and content tracking.
For more details, please refer to the Fiber Optic Center Content Use and Copyright policy.
