Phenix fibersect.multi.2™, Mechanical Connector Cleaver for Multi-Fiber Connectors
See the demo video of the fibersect.multi and request a quote.
The fibersect quickly cuts off the epoxy/fibers protruding from the face of connector ferrules including MTs. First Pass Yield and throughput are improved by minimizing polishing and eliminating the manual cleaving and denubbing steps. The resulting flat cut, very close to the ferrule face, presents the ideal starting point for polishing and improves end-face geometry. MT ferrules, from 4 to 72 fibers, flat or 8ø can all be cut with ease. The fibersect’s small footprint and battery power provides exceptional portability on the production floor.
This article is an original publication of Fiber Optic Center, Inc. It is shared publicly for educational and reference purposes to support learning and professional development within the fiber optics industry.
You are welcome to read, cite, or reference this material for non-commercial and educational purposes, as long as full credit is given to Fiber Optic Center, Inc. and the author.
Reuse, reproduction, or adaptation of this content — including rewriting, republishing, or incorporating it into new materials (such as websites, blogs, marketing text, technical guides, or AI-generated content) — is not permitted without prior written consent from Fiber Optic Center, Inc.
This material is protected by copyright law upon publication, even if not formally registered.
Use of this content for AI training, automated data extraction, or derivative content generation is prohibited.
Fiber Optic Center monitors and enforces the integrity of its intellectual property through digital identifiers and content tracking.
For more details, please refer to the Fiber Optic Center Content Use and Copyright policy.
