New Bedford, MA, USA, August 10, 2016 – Fiber Optic Center, Inc., (FOC), an international leading distributor specializing in helping their customers make the best cable assemblies in the world, announces the fibersect™ from Phenix Fiber Optics for demo at ECOC 2016, stand 706, in Düsseldorf, Germany September 19-21, 2016. The fibersect™ rapidly removes the epoxy from the face of the MT ferrule during MTP/MPO connector processing.
For an appointment to view demo at ECOC, please contact Kathleen Skelton at kskelton@focenter.com.
The fibersect™ (https://focenter.com/phenix-fibersect-multi-2tm-mechanical-connector-cleaver-for-multi-fiber-connectors) quickly cuts off the epoxy from the face of all MT ferrules (4, 8, 12, 16, 24, 48, and 72 fibers) during MTP/MPO connector processing. The resulting flat cut, very close to the ferrule face, presents the ideal surface for polishing, and markedly improves end face geometry. There are improvements throughput and first pass yield by eliminating manual steps and minimizing polishing, resulting in significant savings in production. Adapters can be switched to cut either 0° (flat) or 8° angled MT ferrules and other adapters are available to cut all single fiber ferrules and connectors. The small footprint and battery power of the fibersect provides exceptional portability and ease of use in the production environment.
The fibersect™ advantages include:
- cuts all MT ferrules, 4 to 72 fibers
- cuts flat
- one button solution
- superior end face geometry
- palm size portability
- no core cracks
- battery powered
- no more hand cleaving
- no more denubbing
- no more air polishing
- a fraction of the laser cost
- savings in production
The simplicity is in a three step process. STEP ONE: Insert the ferrule in the slot, STEP TWO: Press the red button to start the cut, and STEP THREE: Cut is completed.
The field of fiber optics has evolved dramatically over the past 40 years, and Roger Robichaud, founder of Phenix Fiber Optics, has been a pioneer in this evolution. In 1978 he founded Orionics, the original manufacturer of fusion splicers and OTDRs in the United States. Phenix Fiber Optics was created in 2005 to pursue research in fiber instrumentation to address the advancing needs of today’s industry. The fibersect™, the newest instrument, exemplifies the achievement of these goals. It provides a faster, simpler, safer and environmentally sound method of cutting multi-fiber ferrules.
Technical questions on the fibersect™ can be asked to the FOC team at 800-473-4237.
Additional resources from the FOC team include:
- View Crimp Technical Solution Content
- View the Glossary, Acronyms, Military Specifications for Connectors
- Q&A Resource: email technical questions to AskFOC@focenter.com