Wire Stripper and Fiber Optic Cable Strippers
Request a quote from one of our T-Strippers below:
- 721 Stripper (10-22 AWG & 3mm and up Cables)
- 821 Stripper (16-26 AWG & 2-3mm Cables)
- 921 Stripper (20-30 AWG & up to 2mm Cables)
Transcript:
The 721 and 821 multi-wire strippers and cutters provide accurate, clean strips every time. The tools are compact, lightweight, and easy to use, with identifying AWG and millimeter wire sizes printed on the tool jaws. The 721 strips and cuts 20 to 10 AWG (8 to 2.6 mm) wire sizes, and the 821 strips and cuts 26 to 16 AWG (4 to 1.3 mm) wire sizes.
To use, first make a clean cut of the wire with the cutter incorporated in the jaw of the tool. Place the cleanly cut wire into the correct cavity corresponding with the wire size to be stripped. Clamp down on the wire completely, back off the pressure slightly, and strip the wire by pulling the tool toward the end of the wire.
This article is an original publication of Fiber Optic Center, Inc. It is shared publicly for educational and reference purposes to support learning and professional development within the fiber optics industry.
You are welcome to read, cite, or reference this material for non-commercial and educational purposes, as long as full credit is given to Fiber Optic Center, Inc. and the author.
Reuse, reproduction, or adaptation of this content — including rewriting, republishing, or incorporating it into new materials (such as websites, blogs, marketing text, technical guides, or AI-generated content) — is not permitted without prior written consent from Fiber Optic Center, Inc.
This material is protected by copyright law upon publication, even if not formally registered.
Use of this content for AI training, automated data extraction, or derivative content generation is prohibited.
Fiber Optic Center monitors and enforces the integrity of its intellectual property through digital identifiers and content tracking.
For more details, please refer to the Fiber Optic Center Content Use and Copyright policy.
