UV Curable Fiber Optical Coatings
| Product | Viscosity (cps) | Refractive Index (cured) | Comment 75 µm films cured in nitrogen at 1.0 J·cm-2 using one D lamp. Temp range is -20°C-130°C continuously and -40°C-200°C brief periods. Exception noted on DF0009. |
|---|---|---|---|
|
Matrix Materials |
4,850 | - | Standard Matrix coating, extremely fast curing, low temp performance, for optical fiber ribboning. |
|
Matrix Materials |
3,000 | - | Tight Buffer Matrix coating, Inner Layer, soft, flexible, buffer fiber up to 500 microns, easy strippability. |
|
Matrix Materials |
1,200 | - | Tight Buffer Matrix coating, medium modulus, tight buffering fiber for 400-900 microns. |
|
Primary Coatings |
4,465 | 1.496 |
Primary coating, Next Generation, soft, enables high draw speeds, superior microbending performance/low microbending, robust field application, wet-on-wet and wet-on dry. |
|
Primary Coatings |
7,000 | 1.482 |
Primary coating, UV-LED curable, for low-loss applications, fast processing, low fiber optic attenuation, excellent low temp micro-bending performance, wet-on-wet and wet-on-dry, robust field performance harsh environment. |
|
Recoating/Fiber Splicing Coating |
2,500 | 1.55 | Recoating & Fiber Splicing coating, high refractive index, original acrylate coating, low viscosity for splicing applications, will not stick to recoater molds. |
|
Recoating/Fiber Splicing Coating |
4,200 | 1.37 | Recoating, low refractive index, high clarity/low haze, softer than 950-200, low modulus, protect with secondary coating. |
|
Secondary Coatings |
6,002 | 1.534 | Secondary coating, Next Generation, industry standard (use with DP-1032), wet-on wet and wet-on-dry, enables high draw speeds, superior microbending performance/low microbending, robust field application. |
|
Secondary Coatings |
5,800 | 1.513 | Secondary coating, UV-LED curable, for high-end telecom including G.654.E applications, works well with DP-1900, fast processing, low fiber optic attenuation, excellent low temp micro-bending performance, wet-on-wet and wet-on-dry, robust field performance harsh environment. |
|
Secondary Coatings |
4,750 | 1.519 (liquid) | Secondary coating, Traditional industry standard, compatible with multiple DeSolite primaries, wet-on-wet and wet-on-dry. |
|
Single Layer Coatings |
10,000 | 1.54 | Single layer fiber coating, high modulus, low moisture sensitivity, high adhesion. |
|
Single Layer Coatings |
6,700 | 1.54 | Single layer fiber coating, original acrylate coating, for high temp applications, Temp range -20°C-150°C/ up to 200°C brief periods. |
NOTE: Most Covestro coatings are formulated for use with microwave lamps. Typically, a “D” and/or “H” bulb is used so the peak irradiance is at 365nm, but the overall wavelengths are from microwaves lamps, so they are broad. The intensity at the focal point is not something that can be easily measured. The cure will partially be determined by the time as well as the intensity.