The method of applying epoxy into the connector is another source of variability that can greatly affect the correct amount/volume of epoxy into the connector.
The most common method is the hand syringe and special OD needle size (usually a 19 or 20 Ga needle). This method relies heavily on the operator “touch and repeatability”. The other methods are Pnuematic dispensing or volumetric dispensing machines. All provide some uniformity in volume application and is the preferred method.
READ THE BLOG: Assuring the correct amount of Epoxy is in the connector
Additional resources from the FOC team include:
- Category Resource:
- View the Glossary, Acronyms, Military Specifications for Connectors
- Q&A Resource: email technical questions to AskFOC@focenter.com
Have questions about this FOC Tip?
Contact FOC with questions at: (800) 473-4237 / 508-992-6464 or email: FiberOpticCenter@focenter.com and we will respond ASAP.