When looking at adding optical fiber processing to a cable plant or adding a different product line such as tight buffer, one needs to be very thoughtful in several categories such as which product will be optimized, Product run time or change over time and what the environment will be required for manufacturing. For example will temperature and humidity need to be controlled and will the process be continuous or Job Shop.
READ THE BLOG: Are all cable lines alike?
Additional resources from the FOC team include:
- Glossary, Acronyms, Military Specifications for Connectors: http://bit.ly/2a2EFn8
- Q&A Resource: email technical questions to AskFOC@focenter.com
- Contact FOC with questions at: (800) 473-4237 / 508-992-6464 or email: email@example.com
- Fiber Optic Center AskFOC: what are the different types of standards for MT/MPO measurements using interferometry? - November 15, 2018
- FOC Tips: Passive component tester configurations - November 13, 2018
- Fiber Optic Center AskFOC: how much is enough or the right amount of epoxy in the connector? - November 12, 2018
- FOC Tips: Step two of single-fiber PC ferrules, developing a polishing process - November 9, 2018
- Fiber Optic Center AskFOC: what causes the Apex of a radius to be imperfect, to be off-center? - November 8, 2018
- FOC Tips: Insertion Loss (IL) is the loss of power due to adding a jumper. - November 7, 2018
- FOC Tips: MT ferrule geometry measurements - November 5, 2018
- FOC Tips: contamination on the fixture prevents ferrules from protruding equal distance from the base of the fixture - November 2, 2018
- Fiber Optic Center AskFOC: how do we decide which passive component tester to purchase? - November 1, 2018
- FOC Tips: Fiber Optic Connector Cross Sectioning example from “Connector A” notes - October 30, 2018