High Intensity Epoxy Curing with Single- and Multipole UV Light Guides
View a demonstration of the radiometer above and request a quote today.
Transcript:
Manufacturers using light curing equipment understand that inconsistent curing may negatively affect their entire assembly process, and even the company's bottom line. The degradation of curing bulbs, light guides and reflectors used with light curing systems can decrease overall light intensity, resulting in incomplete cures. Lost production time or decreased yield. In addition to reduced productivity and increased costs. And improperly calibrated radiometer can cause a user to believe that the correct energy dose is applied in an application. A cure may pass a visual inspection without being complete and fail later in a quality check or on a component delivered to the field. For these reasons, it is very important to ensure consistent light carrying. By periodically monitoring UV intensity or dose with a radiometer.
To assist manufacturers with maintaining an accurate curing process. Dymax has a selection of radiometers that can be used with broad spectrum and LED UV visible light-carrying spot lamps, flood lamps, and conveyor systems. Since the radiometer is such a crucial quality assurance tool for anyone using light carrying equipment, it is important to ensure it is always operating at peak performance. As a result, Dymax recommends that users have their radiometer recalibrated every 6 to 12 months.
